Heapro Safety Shoes
Heapro Derby Composite Safety Shoes
- Fine quality upper leather of 1.8-2.0 mm thickness
- Non-woven 270 GSM Vamp Lining
- Synthetic Leather with 6mm PU Foam Tongue
- Synthetic Leather with 14mm PU Foam Collar
- Thermoplastic-thickness 2mm Counter Stiffener
- Nylon 6/3 ply Thread
- Non-woven Insole
- Plastic Eyelet
- Wide fitting Composite with 200 J impact resistance & 15 KN Compression resistance Toe Cap Oil/Chemical Resistant
- Direct injected PU sole
- Up to 140 °C for 1 minute Heat Resistant
- Up to 15 KVA Electrical Resistance
- Textile laminated molded EVA in Socks
- UK 05 to 12, EU 39 to 46 Sizes
- IS 15298 (Part II):2016 & EN ISO 20345:2011
Heapro Derby Safety Shoes HI-301
Heapro Gumboot Safety Shoes HI-GB-01
MATERIAL: - Made with Full PVC. Water Repellent, highly flexible, extra strong
for comfort and long wear ability.
Available in knee Length with extra protection and comfort.
3- SOLE: - Made in molded PVC. High density light weight, slip resistant,
resistant to certain types of oils / chemicals, can withstand temp. Of 100 deg
C for 1 minute. Highly flexible and low abrasion for extra life.
TOE CAP: - Made with Alloy steel. Light weight / Rust free with an ability to
withstand an impact as per IS - 12254.
REFERENCE STANDARD: - Conforms to IS 12254.
Heapro Safety Shoes Ankle HI-502
- Full Grain fine leather Thickness: 1.8 - 2.00 mm.
- Breathable, highly flexible, extra strong for comfort and long wear ability.
- Molded PU sole with deep cleats.
- High density light weight, slip resistant, resistant to certain types of oils / chemicals, can withstand temp. Of 100 deg C for 1 minute.
- Highly flexible and low abrasion for extra life.
- TOE CAP: Made with Alloy Steel. Light weight / Rust free with an ability to withstand an impact of 200 J as per IS - 15298.
- THREADS: 3 Ply / 6 Ply nylon. To make the uppers strong at all the joints and intern enhances the looks and life.
- REFERENCE STANDARD: - Conforms to IS 15298
Heapro Safety Shoes Derby HI-501
Heapro Safety Shoes Double Density HI-701
Heapro Safety Shoes HI-3010 PU Double Density
Heapro Safety Shoes HI-902 DD
- Fine quality upper leather of 1.8-2.0 mm thickness
- Breathable, highly flexible, extra strong for comfort and long wear ability.
- Direct injected PU sole, Double Density. Soft sole upper for wearer's comfort and tough bottom sole to prevent injury at workplace.
- High density light weight, slip resistant, resistant to certain types of oils / chemicals, can withstand temp. of 100°C for 1 minute. Highly flexible and low abrasion for extra life.
- TOE CAP: Made with Alloy Steel. Light weight / Rust free with an ability to withstand an impact of 200 J as per IS - 15298.
- Reflective Tape for high visibility.
- THREADS: 3 Ply / 6 Ply nylon to make the uppers strong at all the joints , also enhances the looks and life of the safety shoes.
- Conforms to EN ISO 20345 S1 SRC
Heapro Safety Shoes Notout@100
OPERATIVES STANDARD : MEET IS 15298:2016 [PART-II]
VAMP + COUNTER: TOE GUARD LEATHER 1.8-2.0 MM
TONGUE: BLACK CADURA
COLLAR: BLACK CADURA
VAMP LINING/QUARTER LINING: SKIN FIT WITH BACKER WITH 5MM FOAM
TOE CAP: COMPOSITE TOE CAP 200J
INSOLE: NON WOVEN INSOLE
SOLE: SINGLE DENSITY
IN SOCKS: PU FOAM MOLDED
EYELET: 600 NO HEAPRO PRINT EYELET AND BMW HOOK ON TOP
LACE: NYLON LACE ROUND 90 CM BLACK/CAMEL
THREAD: NYLON 3/6 PLY THREAD BLACK/CAMELCOLOR
COUNTER STIFFENER: THERMOPLASTIC SHEET 2 MM
COLLAR FOAM: THICKNESS 14 MM
TONGUE FOAM: THICKNESS 10 MM
Heapro Safety Shoes Notout@50
OPERATIVES STANDARD : MEETS IS 15298:2016 [PART-II]
VAMP + QUARTER + COUNTER : FABRIC KNITTING UPPER
TONGUE LOGO: NOT OUT NON WOVEN LOGO
TONGUE : YELLOW SPACER + BLUE MESH
COLLAR: FABRIC KNITTING
VAMP LINING: SPACER YELLOW LINING
QUARTER LINING: SPACER YELLOW LINING
TOE CAP: COMPOSITE TOE CAP - 200 J